Said "again" because in October last year, there were reports of improper use of special equipment forklifts when cement was transported in large bags through containers, and forklifts became cranes. Ben Wang Safety has warned that forklifts are not cranes. ( " Safety Reminder: Forklift is not a crane ")
At the beginning of the new year, I saw a report that a cement enterprise upgraded the cement packaging and launched a ton packaging service project. The process is that when the cement (small) bags are transported to the designated position through the conveyor belt, the palletizing robot will accurately grab the cement bags and stack them on the designated stacking position according to the preset program. With the start of the forklift, through the operations of (lifting the forklift as a crane) hanging bags, steering, (transporting to the front of the truck with the cement bag assembly) pulling up, (moving close to the carriage) lowering, a ton of cement assembly is placed on the truck. Forklifts are used
from the stacking position to the final loading. The forklift lifts the small bags stacked from the cement stack position, "trudges" to the front of the truck, and after a series of operations, the cement is integrated into the carriage in turn. The forklift used is large, unlike the above example, the forklift body is small, and a special frame is installed on the fork, the front of the frame extends out of the cantilever, and the front of the cantilever hangs a large cement bag. But they are all using forklifts improperly.
From the whole process of reporting the implementation of the ton cement palletizer project, from site selection to equipment manufacturer ordering, from plant construction to equipment assembly, from cable laying, program installation to trial operation, the palletizing robot was selected to integrate the palletizing of small bags of cement. How can forklift be used as a crane in the process of transshipment from the stacking position to the final loading!
浙公网安备33010802003254号