On October 26, the Sichuan Provincial Department of Economy and Information Technology, the Sichuan Provincial Development and Reform Commission, and the Sichuan Provincial Department of Ecology and Environment jointly issued the Implementation Plan for Carbon Peak in the Industrial Sector of Sichuan Province (hereinafter referred to as the "Plan"). According to
the Plan, by 2025, the energy consumption per unit of industrial added value above the scale of Sichuan Province will be reduced by 14% compared with 2020, and the carbon dioxide emission per unit of industrial added value will be reduced by 19. To ensure that carbon dioxide emissions in the industrial sector of the province reach their peak by 2030, and strive to take the lead in reaching the peak of carbon dioxide emissions in key industries where conditions permit.
The Plan proposes to focus on achieving the goal of carbon peak and carbon neutralization, to optimize and strengthen clean energy industries such as water, scenery and natural gas (shale gas), to develop and expand clean energy supporting industries such as crystalline silicon photovoltaic and energy equipment, and to accelerate the development of clean energy application industries such as power batteries, vanadium and titanium, and new energy vehicles. Accelerate the large-scale application of new energy storage, promote the development of the whole chain of hydrogen energy "production, storage, transportation and marketing", and explore the coordinated development of wind, solar, hydropower and hydrogen energy industry.
The circular calls for improving the level of clean energy utilization. We will promote the efficient use of clean energy such as photovoltaic, wind power, hydropower, hydrogen energy and biomass power generation in industry. We will encourage the large-scale application of alternative energy sources such as hydrogen energy, biofuels and waste-derived fuels in steel, cement and chemical industries. Enhance the absorption capacity and intelligent level of distributed energy in power grid, encourage enterprises and parks to develop distributed photovoltaic, decentralized wind power, natural gas distributed energy, multi-energy storage, high-efficiency heat pump, waste heat and pressure utilization, intelligent energy management and control, promote efficient complementary utilization of multi-energy, and promote large-scale and high proportion of clean energy consumption.
The Plan also proposes to build a new energy automobile industry chain supply chain in an all-round way, vigorously develop the whole industry chain of lithium-ion batteries and power storage batteries, and accelerate the R & D and industrialization of key technologies such as power battery materials, monomers, modules and management systems. Cultivate and introduce the leading enterprises of new energy vehicles, support the transformation of traditional fuel vehicle enterprises, and form the mass production capacity of new energy vehicles. We will actively develop battery recycling, cascade utilization and resource recycling, explore large-capacity supercapacitor energy storage equipment, and introduce cutting-edge projects such as energy storage power stations, battery managers and electrical control. Speed up the construction of charging piles and the innovation of power exchange mode, and build a convenient, efficient and moderately advanced charging network system.
In addition, the Plan calls for strengthening the recycling of renewable resources. We will promote the recycling of waste from emerging industries such as retired power batteries, photovoltaic modules and wind turbine blades, carry out the establishment of demonstration enterprises, demonstration projects and demonstration scenarios for the recycling of power batteries for new energy vehicles, and promote the construction of a recycling system for power batteries.
In view of the electronics industry, the Plan calls for accelerating the high-end development of the crystalline silicon photovoltaic industry , promoting technological updates in key links, and continuously reducing production energy consumption and costs. Increase crystalline silicon the chain development of silicon materials, silicon wafers, batteries and components, and form a coordinated industrial cluster in the upper, middle and lower reaches. Promote the innovation and development of thin film photovoltaic industry. Promote the R & D and industrial application of polysilicon closed-loop manufacturing technology, advanced crystal pulling technology and clean production technology of printed circuit board. By 2025, the proportion of non-electric energy in lithium-ion materials and optical fiber industries will be below 7% and 2% respectively. By 2030, the manufacturing energy consumption of electronic materials and electronic products will be significantly reduced .
The full text is as follows:
Notice
on Printing and Issuing the Implementation Plan of Carbon Peak in the Industrial Field of Sichuan Province (Chuan Jing Xin Huan Zi [2023] No.
173). Economic and Information Bureau, Development and Reform Commission and Ecological Environment Bureau of each city (prefecture): With the approval of the provincial government, the Implementation Plan for Carbon Peak in the Industrial Field of Sichuan Province is now printed and distributed to you, please implement it carefully.
Sichuan Provincial Department
of Economy and Information Technology Sichuan Provincial Development and Reform Commission
Sichuan Provincial Department
of Ecology and Environment October 25
, 2023 Sichuan Province Industrial Carbon Peak Implementation Plan
In order to thoroughly implement the major strategic decisions of the Party Central Committee and the State Council on carbon peak and carbon neutralization and the work deployment of provincial Party committees and provincial governments, promote carbon peak in the industrial field in an orderly manner, and accelerate the realization of green and low-carbon transformation in the industrial field. This plan is formulated in accordance with the Implementation Plan for Carbon Peak in the Industrial Field, the Implementation Opinions of the CPC Sichuan Provincial Committee and the Sichuan Provincial People's Government on Implementing the New Development Concept Completely, Accurately and Comprehensively to Do a Good Job in Carbon Peak and Carbon Neutralization, and the Implementation Plan for Carbon Peak in Sichuan Province, and in combination with the actual situation of our province.
1. General requirements
(1) Guiding ideology. Guided by Xi Jinping Thought on Socialism with Chinese Characteristics for a New Era, we should thoroughly implement the thought of ecological civilization of Xi Jinping and the spirit of the important instructions of the General Secretary of Xi Jinping to visit Sichuan, comprehensively implement the decision-making arrangements of the Twentieth Congress of the CPC and the Third Plenary Session of the Twelfth Provincial Committee of the CPC, base ourselves on the new stage of development, completely, accurately and comprehensively implement the new development concept, serve and integrate into the new development pattern. We should coordinate the relationship between industrial development and emission reduction, overall and local, short-term and medium-term and long-term, take green low-carbon transformation and high-quality development in the industrial field as the guide, deepen the structural reform on the supply side as the main line, focus on industrial restructuring, focus on energy conservation, carbon reduction and recycling transformation, and implement key industries. Accelerate the construction of a modern green industrial system characterized by high efficiency, recycling and low carbon, and provide strong support for ensuring the timely realization of carbon peak and carbon neutralization.
(2) Basic principles.
Steady and orderly, key breakthroughs. On the premise of maintaining a steady increase in the proportion of manufacturing industry and the safety of industrial chain and supply chain, we should actively and steadily promote the tasks of carbon peak, coordinate the relationship between industrial economic growth and green low-carbon transformation, and promote key areas, key industries and conditional industrial parks to take the lead in peak. Give priority to
saving and control the source. We will continue to give top priority to saving energy and resources, improve utilization efficiency, continuously reduce resource and energy consumption and carbon emissions per unit of major products, and reduce carbon dioxide emissions from the source.
The government leads and the market leads. Insist on both the government and the market, better play the role of the government, and deepen the reform of energy and related fields. Give full play to the role of market mechanism, guide market participants to actively participate in carbon peak work, and form an effective incentive and restraint mechanism oriented by carbon emission reduction.
Innovation-driven, digital empowerment. We should persist in taking innovation as the first driving force, strengthen scientific and technological innovation and institutional innovation, vigorously promote green and low-carbon technological research and technological innovation, enable green with digitalization and intellectualization, and foster and strengthen green and low-carbon new momentum.
(3) Main objectives. During
the 14th Five-Year Plan period, remarkable progress has been made in the adjustment and optimization of industrial structure and energy consumption structure, the utilization efficiency of energy resources has been greatly improved, a number of green factories and green industrial parks have been built, a number of low-carbon zero-carbon-negative technology and equipment products with remarkable emission reduction effect have been developed, demonstrated and popularized, and green low-carbon advantages have been achieved. High-standard construction of national strategic support zones to achieve the goal of carbon peak and carbon neutralization lays a solid foundation for the realization of carbon peak and carbon neutralization. By 2025, the energy consumption per unit of industrial added value above the scale will be reduced by 14% compared with 2020, and the carbon dioxide emissions per unit of industrial added value will be reduced by 19.
During the "15th Five-Year Plan" period, significant progress has been made in the adjustment of industrial structure and energy consumption structure, and the utilization efficiency of energy resources in key industries has reached the advanced level in China. Key breakthroughs have been made in green low-carbon technologies, green low-carbon industries have maintained the leading level in the country, and carbon neutralization capacity has been strengthened on the basis of achieving carbon peak in the industrial sector. The intensity of industrial energy consumption and carbon dioxide emissions will continue to decline, so as to achieve the synergy of pollution reduction and carbon reduction, ensure that the carbon dioxide emissions in the industrial sector of the province will reach the peak by 2030, and strive to take the lead in reaching the peak of carbon dioxide emissions in key industries where conditions permit.
2. Key tasks
(1) Deep adjustment of industrial structure. We will accelerate the optimization and adjustment of industrial structure and layout, resolutely curb the blind development of "two high and one low" projects, and vigorously cultivate and develop green and low-carbon industries. Accelerate the construction of a green and low-carbon development pattern. Based on the overall development and regional coordination of the whole province, we should focus on promoting green and low-carbon development, optimize the regional industrial layout as a whole, upgrade the industrial level and development level, and build an industrial development pattern that supports carbon peak and carbon neutralization. Based on the advantages and industrial foundation of clean energy in our province, we should undertake industrial transfer in Beijing-Tianjin-Hebei, Yangtze River Delta, Guangdong-Hong Kong-Macao Greater Bay Area and other regions at a high level, and actively undertake the development of green high-energy industries that meet the requirements of ecological environment zoning control and environmental protection, energy efficiency and safety production standards. Combining with the characteristics of mineral resources and industrial structure in our province, we will promote the development of vanadium and titanium iron and steel, non-ferrous metal smelting, natural gas chemical industry and other industries with special advantages to supplement, strengthen and extend the chain, and promote the high-quality development of the industrial chain.(The Provincial Development and Reform Commission, the Department of Economy and Information Technology, the Department of Natural Resources, the Department of Ecological Environment, the Department of Emergency Management and the Provincial Bureau of Economic Cooperation are responsible for the division of responsibilities, the same below)
to promote the green and low-carbon transformation of industry. We will strengthen source reduction, process control and efficient end management, promote the use of advanced and applicable technologies and modern information technologies in traditional industries, and continue to implement technological upgrading, equipment renewal and green upgrading. To formulate the implementation plan of carbon peak in key industries such as iron and steel, non-ferrous metals, building materials and chemical industry, and to clarify the main objectives and implementation paths of each industry. We will improve the comprehensive standard system focusing on environmental protection, energy consumption, quality, safety and technology, strictly enforce the law regularly and implement mandatory standards, eliminate backward production capacity in accordance with the law and regulations, eliminate excess capacity, and strictly implement the policy of capacity replacement in steel, cement, flat glass, electrolytic aluminium and other industries. (Provincial Development and Reform Commission, Economic and Information Department, Ecological Environment Department, Emergency Management Department, Provincial Market Supervision Bureau, Provincial Economic Cooperation Bureau, etc.)
Resolutely curb the blind development of "two high and one low" projects. We should strengthen the classification and disposal, dynamic monitoring and inventory management of high energy consumption, high emission and low level projects. Strictly control the access of high energy consumption, high emission and low level projects, strengthen the energy conservation review and environmental impact assessment of fixed assets investment projects, comprehensively evaluate the energy consumption and carbon emissions of projects, and resolutely curb the impulse of high carbon energy consumption. The "two high and one low" projects under construction, proposed construction and stock shall be thoroughly investigated, and the projects under construction that do not meet the requirements shall be ordered to stop construction and rectify within a time limit in accordance with the law and regulations; the proposed projects shall be scientifically evaluated to ensure that they meet the requirements of national industrial planning, industrial policy, energy conservation review and capacity replacement; We will accelerate the transformation and upgrading of enterprises with potential for energy conservation and emission reduction, eliminate backward production capacity in an orderly manner, and formulate a "one enterprise, one policy" transformation plan. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, etc.)
Vigorously develop green and low-carbon industries. We will thoroughly implement the major decision-making and deployment of the provincial Party Committee and the provincial government, and accelerate the development of strategic emerging industries such as new generation information technology, biotechnology, new energy, new materials, high-end equipment, new energy vehicles and ships, green environmental protection and aerospace. Focus on achieving the goal of carbon peak and carbon neutralization, optimize and strengthen clean energy industries such as water, scenery, natural gas (shale gas), develop and expand clean energy supporting industries such as crystalline silicon photovoltaic and energy equipment, and accelerate the development of clean energy application industries such as power batteries, vanadium and titanium, and new energy vehicles. Accelerate the large-scale application of new energy storage, promote the development of the whole chain of hydrogen energy "production, storage, transportation and marketing", and explore the coordinated development of wind, solar, hydropower and hydrogen energy industry. We will accelerate the development of the digital economy, promote the digital transformation of industries, and promote the deep integration of emerging technologies such as the Internet, big data, artificial intelligence, and the fifth generation mobile communications (5G) with green and low-carbon industries. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Economic Cooperation Bureau, Provincial Energy Bureau, etc.)
Promote low-carbon collaborative demonstration of industry. We will strengthen the coupling development of energy, iron and steel, building materials, chemical industry, non-ferrous metals, textiles, papermaking, food, transportation and other industries, promote industrial recycling links, and support the popularization and application of steel Co production, refining and chemical integration, coal, electricity and heat integration, forest, pulp and paper integration, gas and hydrogen integration and other modes. We will strengthen the coordinated layout of industrial chains across regions, encourage leading enterprises to form innovative consortia with upstream and downstream enterprises, inter-industry enterprises and colleges and universities to carry out coordinated carbon reduction actions, and build an industrial chain in which enterprises are connected end to end, supply and demand, and interconnected. Build a number of "industrial synergy" and "carbon sequestration" demonstration projects. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecology and Environment, Provincial Economic Cooperation Bureau, etc.)
(2) Further promote energy conservation and carbon reduction. With energy conservation and efficiency improvement as the starting point of carbon reduction, we will accelerate the implementation of energy conservation and carbon reduction actions, substantially improve the energy efficiency of key industries and products, improve the level of clean energy utilization, the reuse rate of industrial water and the level of terminal energy electrification, and promote low-carbon, intelligent and systematic industrial energy use. Adjust and optimize the structure of energy consumption. We will focus on controlling fossil energy consumption, promote coal reduction, coal restriction and diversified substitution in key coal-using industries such as iron and steel, coal chemical industry and cement in an orderly manner, strengthen the centralized use of coal, and promote the clean utilization of coal according to its quality and classification. Promote clean and efficient coal utilization technology and equipment in key industries such as iron and steel, cement, boilers, kilns and other key areas. Promote the "reduction and increase" of oil consumption, and promote the substitution of traditional fuels such as bio-liquid fuels and sustainable aviation fuels. We will promote the comprehensive utilization of natural gas resources and guide natural gas consumption in an orderly manner. Promote industrial green power consumption, continuously increase the proportion of green power consumption, and gradually reduce the proportion of fossil energy consumption. (Provincial Development and Reform Commission, Economic and Information Department, Emergency Management Department, Provincial Energy Bureau, State Grid Sichuan Electric Power, etc.)
Improve the level of clean energy utilization. We will promote the efficient use of clean energy such as photovoltaic, wind power, hydropower, hydrogen energy and biomass power generation in industry. We will encourage the large-scale application of alternative energy sources such as hydrogen energy, biofuels and waste-derived fuels in steel, cement and chemical industries. Enhance the grid distributed energy consumption capacity and intelligent level, encourage enterprises and parks to develop distributed photovoltaic, decentralized wind power, natural gas distributed energy, multi-energy storage, high-efficiency heat pump, waste heat and pressure utilization, intelligent energy management and control, promote multi-energy efficient complementary utilization, and promote large-scale and high proportion of clean energy consumption. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Provincial Energy Bureau, State Grid Sichuan Electric Power, etc.)
Greatly improve energy efficiency. Focus on key industries such as iron and steel, electrolytic aluminium, cement, flat glass, oil refining, ethylene, synthetic ammonia, calcium carbide and data centers, encourage enterprises to match the advanced value or international advanced level of energy consumption quota standards, promote the app lication of advanced technology, accelerate the implementation of energy-saving and carbon-reducing upgrading and transformation, and cultivate a number of energy-saving and carbon-reducing benchmarks. Build a number of demonstration projects for energy conservation and carbon reduction, and form a number of technologies and experiences that can be replicated and popularized. We will promote energy-saving renovation of key energy-using equipment systems such as motors, fans, pumps, compressors, transformers, heat exchangers and industrial boilers, and comprehensively improve energy efficiency. Energy-saving diagnosis will be implemented in an all-round way, and key enterprises will be encouraged to adopt contract energy management, energy trusteeship and other modes to implement transformation. Promote key energy-using units to carry out energy efficiency benchmarking, upgrade and eliminate in batches according to energy efficiency benchmarking level and benchmark level, and promote key energy-using units to improve energy consumption level. We will continue to promote the construction of on-line monitoring system for energy consumption of key energy-using units, guide key energy-using units to improve their energy management system, and explore the evaluation of the effect of energy management system construction. Give full play to the leading role of state-owned enterprises in key areas, especially the central enterprises in Sichuan, and take the lead in carrying out voluntary energy-saving commitments. (Provincial Development and Reform Commission, Department of Economy and Information Technology, SASASAC, etc.)
Promote terminal energy electrification. We should broaden the field of electric energy substitution and encourage the implementation of electric energy substitution and electrification transformation. We will accelerate the conversion of industrial coal to electricity, take measures according to local conditions and industries, accelerate the promotion and application of electric kilns, electric boilers, electric heating and other equipment, and carry out electric energy substitution such as high-temperature heat pumps and high-power electric heating energy storage boilers. We will strengthen power demand side management, formulate incentive policies, and guide enterprises to use electricity in an economical, environmentally friendly, green, intelligent, and orderly manner. Establish a long-term management mechanism for electricity conservation, and encourage enterprises to improve energy efficiency through contract energy management. Promote the technology of electric cold storage and heat storage according to local conditions, and accelerate the improvement of the management capacity of charging infrastructure. Improve the market guidance mechanism, encourage enterprises to actively participate in peak shaving, and enhance the flexibility of power demand side. We will carry out the establishment of demonstration enterprises and parks for power demand side management in the industrial field, and demonstrate and popularize the application of related technology products. (Provincial Development and Reform Commission, Economic and Information Department, Provincial SASASAC, Provincial Energy Bureau, etc.)
Effectively strengthen the supervision and management of energy conservation. Strengthen the energy conservation review of fixed assets investment projects, comprehensively evaluate the energy consumption of projects, and promote energy conservation and carbon reduction from the source. We will improve the energy-saving supervision system at the provincial, municipal and county levels, establish a cross-sectoral linkage mechanism, classify and grade the energy efficiency of energy-using enterprises in key industries based on the results of energy-saving supervision, comprehensively use administrative penalties, credit supervision, green electricity prices, peak staggering production and other means, implement classified control and precise measures, enhance the binding force of energy-saving supervision, and strengthen the application of energy-saving supervision results. According to energy-saving laws and regulations and mandatory energy consumption quota standards, we should standardize energy-saving supervision and law enforcement, innovate supervision methods, explore cross-regional energy-saving supervision, and achieve full coverage of energy-saving supervision of "two high and one low" projects, key energy-using industries and enterprises, and key energy-using equipment. (Provincial Development and Reform Commission, Department of Economy and Information Technology, etc.)
(3) Strengthen the benchmarking of green manufacturing. We will continue to promote the construction of green manufacturing system, cultivate a number of green manufacturing benchmarking models in different fields, demonstrate and drive the green and low-carbon development of the whole industrial chain, and consolidate the foundation of green and low-carbon development of industry. Build green, low-carbon and recycling plants. We will continue to promote the cultivation and establishment of green factories, build a number of national and provincial green factories, and further expand the coverage of industries and regions. We will guide green factories to further upgrade their standards and build a number of green low-carbon and recycling factories to meet the advanced international and domestic standards. Explore and improve the evaluation index system oriented by low-carbon and recycling, guide enterprises to implement energy-saving and carbon-reducing transformation, and accelerate the realization of intensive plant, harmless raw materials, clean production, waste recycling and low-carbon energy. Support qualified enterprises to establish carbon neutral demonstration enterprises. (Department of Economy and Information Technology, Department of Ecological Environment, Provincial Market Supervision Bureau, Provincial Economic Cooperation Bureau, etc.)
To build a green, low-carbon and recycling park. We will expand and deepen the construction of green industrial parks, improve the green industrial chain of enterprises in the parks, promote the utilization of industrial waste heat, waste water, waste gas and waste liquid resources through "horizontal coupling and vertical extension", and actively promote the construction of industrial green micro-grids in the parks. Supporting the construction of green industrial parks with good foundation, distinctive features and strong representativeness to reach carbon peak and carbon neutralization advanced models, and forming a number of replicable and popularizable typical models. Explore the development of green low-carbon, recycling park, near zero carbon emission park pilot demonstration. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Economic Cooperation Bureau, etc.)
To build a green low-carbon supply chain. Supporting leading enterprises with great influence and high management level in automobile, machinery, electronics, communications and other industries, playing a leading role in key areas such as supply chain integration, innovation capability sharing, intelligent low-carbon management, and driving upstream and downstream enterprises to achieve green and low-carbon development. We will support the integration of industrial chains, foster a number of leading enterprises in the industrial chain with ecological dominance, build a low-carbon industrial chain supply chain with upstream and downstream linkages, encourage "one chain, one policy" to formulate low-carbon plans for the industrial chain, and publish reports on the effectiveness of carbon emission reduction by core suppliers. Encourage qualified industrial enterprises to speed up the construction of special railway lines and pipeline infrastructure, actively promote the use of new energy transport equipment, and promote the optimization of bulk cargo transport mode and in-plant logistics transport structure. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Department of Transportation, Department of Commerce, Provincial Market Supervision Bureau, Provincial Economic Cooperation Bureau, etc.)
Promote green and low-carbon design of industrial products. Enterprises should be guided to use environmentally friendly raw materials such as non-toxic, harmless, low toxic, low harmful and low (no) volatile organic compounds (VOCs) in the production process. Promote green materials with less consumption, recyclable, reusable, degradable, non-toxic and harmless or low toxicity and low harm. Promote product design schemes that are easy to disassemble, classify and recycle, and increase the proportion of alternative use of renewable raw materials.Focusing on electrical, electronic, food, textile and other products, we will promote green design requirements such as lightweight, modularization, integration and intellectualization of products. Accelerate the implementation of industrial green low-carbon product evaluation. Select typical industrial products with wide application and large carbon emissions and industries with distinctive advantages to promote carbon footprint certification. Deeply carry out cleaner production audit and evaluation certification, and take the results of audit and evaluation certification as an important basis for the formulation and implementation of differentiated policies, so as to promote enterprises in key industries to implement systematic cleaner production transformation such as energy saving, water saving, material saving, pollution reduction and carbon reduction. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Market Supervision Bureau, etc.)
Promote the green and low-carbon development of small and medium-sized enterprises. Continuously optimize the resource allocation and production mode of small and medium-sized enterprises, explore the evaluation of green low-carbon development of small and medium-sized enterprises, and enhance the low-carbon development capacity of small and medium-sized enterprises. Implement green development promotion projects for small and medium-sized enterprises, carry out energy-saving diagnostic services for small and medium-sized enterprises, fully tap energy-saving potential, and promote the implementation of energy-saving transformation. Support small and medium-sized enterprises to develop green technology, design green products, build green factories, apply for and obtain green product certification, and cultivate a number of specialized and new "Little Giants" in the field of low carbon. Innovation of green low-carbon service supply mode, introduction of green manufacturing system solutions, energy-saving and carbon reduction technology integrated solutions and other specialized green service modes for SMEs, to enhance the green manufacturing capacity and management level of SMEs. (Department of Economy and Information Technology, Department of Ecological Environment, etc.)
(4) Vigorously develop circular economy. We will continue to optimize the allocation of resources, promote recycling, strengthen the synergy between resource conservation and carbon reduction, and reduce carbon dioxide emissions in the industrial sector through efficient recycling of resources. Promote the circular development of industrial parks. According to the orientation of the main functional area and the development plan of the park, aiming at improving the resource output rate and recycling utilization rate, the spatial layout of the park is optimized and the recycling transformation of the park is carried out. Promote the circular production and industrial circular coupling of enterprises in the park, organize enterprises to implement cleaner production transformation, promote the comprehensive utilization of waste, cascade utilization of energy and recycling of water resources, promote the resource utilization of industrial residual pressure and waste heat, waste gas and waste residue, actively promote centralized gas supply and heating, and encourage conditional parks to create "waste-free parks". By 2025, all qualified parks at or above the provincial level will implement recycling transformation. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Department of Water Resources, etc.)
Strengthen the comprehensive utilization of industrial solid waste. Improve the comprehensive utilization rate of mineral resources, promote the large-scale and high-value utilization of industrial solid wastes such as coal gangue, fly ash, tailings, smelting slag, industrial by-product gypsum, red mud and chemical waste residue, and encourage their application to replace primary non-metallic minerals, sand and other resources. On the premise of ensuring safety and environmental protection, the application of phosphogypsum and titanium gypsum in soil improvement, underground filling and subgrade construction is explored. We will promote the coordinated disposal of solid waste in iron and steel kilns, cement kilns and chemical plants. Promote the production of cement from non-carbonate raw materials, optimize the structure of raw materials such as coal chemical industry, synthetic ammonia and methanol, and promote the diversification of petrochemical raw materials. We will implement preferential tax policies for comprehensive utilization of resources, organize and carry out evaluation of comprehensive utilization of industrial solid waste resources, and accelerate the construction of demonstration bases (parks) for comprehensive utilization of industrial resources. Explore and establish the industrial development model of comprehensive utilization of industrial solid waste based on regional characteristics in the concentrated production area of solid waste, the main production area of coal and the industrial agglomeration area of basic raw materials. By 2025, the comprehensive utilization rate of bulk industrial solid waste will reach 78% (except tailings), and by 2030, it will be further increased to 82% (except tailings). (Provincial Development and Reform Commission, Department of Economy and Information Technology, etc.)
Strengthen the recycling of renewable resources. Promote the standardized, large-scale and clean utilization of renewable resources, implement the "Internet +" recycling mode, improve the recycling network of waste materials, and establish and improve recycling channels. Strengthen the standardized management of the recycling industry of renewable resources, promote the development of industrial agglomeration, cultivate key enterprises of recycling of renewable resources, and encourage enterprises that meet the normative conditions to publish their carbon footprints. We will accelerate the popularization and application of advanced and applicable recycling technologies and equipment. We will promote the recycling of waste from emerging industries such as retired power batteries, photovoltaic modules and wind turbine blades, carry out the establishment of demonstration enterprises, demonstration projects and demonstration scenarios for the recycling of power batteries for new energy vehicles, and promote the construction of a recycling system for power batteries. We will promote the implementation of the extended producer responsibility system around products such as electrical appliances, electronics and automobiles. Encourage recycling enterprises in special industries such as waste electronics and waste batteries to establish strategic cooperation with utilization enterprises, support the chain development of enterprises in various links, and promote the effective connection between recycling and utilization. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Department of Commerce, Provincial Energy Bureau, etc.)
Promote the development of remanufacturing industry. High-quality development of remanufacturing industry with automotive parts, construction machinery, mechanical and electrical products as the main body, promoting the remanufacturing of key parts such as aeroengines and gas turbines, shield machines, servers and heavy machine tools, creating innovative carriers for remanufacturing, and accelerating the innovation and application of key common remanufacturing technologies such as additive manufacturing, special materials, intelligent processing and non-destructive testing. Implement intelligent remanufacturing and upgrading of mechanical and electrical products, and cultivate suppliers of remanufacturing solutions to meet the needs of maintenance and upgrading of mechanical and electrical equipment in steel, chemical, transportation and other industries. We will strengthen the identification of renewable and remanufactured products, promote the establishment of a product conformity assessment system combining voluntary certification and self-declaration, and further improve the certification mechanism and standards for remanufactured products. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Commerce, Provincial Market Supervision Bureau, etc.)
(5) Accelerating the transformation of green and low-carbon science and technology in industry. We will strengthen the innovation and application of key green and low-carbon common technologies, give full play to the leading role of scientific and technological innovation in the green transformation of industry, and support the carbon peak in the industrial sector with scientific and technological changes. Strengthen breakthroughs in key common technologies. A number of key scientific and technological projects for energy conservation and carbon reduction have been implemented for basic components and components, basic processes and key basic materials. Concentrate superior resources to carry out carbon capture, utilization and storage technology, zero-carbon industrial process reengineering technology, "three wastes" low-carbon utilization technology, raw material and fuel substitution technology, new energy-saving and new energy materials and other low-carbon zero-carbon negative carbon technology research, and form a number of original scientific and technological achievements. We will carry out research and development of common technologies such as clean and efficient utilization of fossil energy, graded utilization of renewable resources, remanufacturing of high-end intelligent equipment, and efficient energy-saving and environmental protection equipment, and strengthen the supply of green and low-carbon technologies. Focus on the key areas of green and low-carbon industries, formulate a road map for tackling key problems in industrial technology, implement major provincial science and technology projects and key R & D projects, break through a number of key technologies and key common technologies, and cultivate and build a number of key laboratories, engineering (technology) research centers, technology innovation centers and other national or provincial innovation bases and innovation platforms. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial Energy Bureau, etc.)
Accelerate the application and popularization of advanced and applicable technologies. We will regularly compile and publish catalogues of green technologies, equipment and products such as low-carbon, energy-saving, cleaner production and comprehensive utilization of resources, select a number of advanced, economical, potential and urgently needed technologies and equipment, and encourage enterprises to strengthen equipment renewal and large-scale application of new products. Focus on the promotion of all scrap electric arc furnace short process steelmaking, highly selective catalysis, efficient waste heat recovery and utilization, multi-pollutant co-treatment of ultra-low emissions, heating furnace low nitrogen combustion, dry granulation dust removal, industrial wastewater advanced treatment and reuse, efficient extraction and separation, efficient membrane separation and other process equipment technology. To organize the formulation of major low-carbon technology promotion programs and supply and demand docking guidelines. Support enterprises, universities and scientific research institutions to establish incubators and innovation and entrepreneurship bases for green technology innovation projects. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, etc.)
Promote the demonstration and application of low-carbon technology innovation. We will implement demonstration projects for the transfer and transformation of green low-carbon technological innovation achievements and promote the industrial application of green low-carbon technologies. We will optimize and improve the insurance compensation mechanism for the first batch of major technical equipment and key new materials, and support the demonstration and application of qualified green low-carbon technical equipment and green materials. Focusing on key industries such as iron and steel, building materials, chemical industry, non-ferrous metals, papermaking and textiles, and focusing on deep decarbonization of production processes, substitution of raw materials and fuels, industrial process reengineering and electrification transformation, a number of green low-carbon technologies with great potential for green development, high maturity and popularization are selected for demonstration and application. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecology and Environment, etc.)
(6) Promoting the green and low-carbon transformation of digital enabling industries. Digital transformation drives the transformation of production mode, relying on the national "East Number West Calculation" project, accelerating the deep integration of new generation information technology and industry in our province, accelerating the construction of digital transformation promotion center, and actively promoting the green and low-carbon transformation of digital technology-enabled industry. Accelerate the digital transformation of manufacturing industry. Promote the deep integration of emerging technologies such as Internet, big data, artificial intelligence and the fifth generation mobile communication (5G) with the industry of our province, promote the integration and product innovation of information technology and energy-saving, low-carbon and environmental protection technologies, and improve the permeability and coverage of digital technology for industrial development. Construct the clean energy industrial Internet platform system of the whole province, give full play to the supporting role of digital system on the energy supply and demand side, improve the intelligent management level of power grid, and enhance the ability to absorb clean energy and operate safely. We will promote the popularization and application of domestic industrial software and support the digital and intelligent transformation and upgrading of traditional industries. Promote the digital and intelligent transformation of industrial parks, state-owned enterprises and large private enterprises with good conditions in terms of transformation awareness and information foundation, and create a number of benchmarking projects for digital transformation of manufacturing industry. Promote the synchronous planning, construction and operation of information security technology measures and digital technology applications, and build a security ecosystem for the digital transformation of manufacturing industry. (Provincial Development and Reform Commission, Economic and Information Department, Science and Technology Department, Provincial SASASAC, Provincial Market Supervision Bureau, Provincial Energy Bureau, etc.)
Establish a carbon digital management system. Actively deploy and develop intelligent industrial integrated carbon management platform, explore regional carbon management mode supported by digital technology, realize visualization, traceability and analysis of carbon emission management, and enhance the ability of perception, monitoring, early warning and emergency response. Promote the construction of three-level carbon emission information sharing system among competent departments, parks and enterprises, and form a benign interaction among governments at all levels, industrial parks, large and medium-sized enterprises and other relevant subjects. Promote enterprises to build carbon emission data measurement, monitoring and analysis system. We will build a public service platform for carbon neutralization in key industries and industries with distinctive advantages, and establish a basic database of carbon emissions throughout the life cycle of products. Strengthen the monitoring and early warning of the production capacity and output of key products, and improve the security capability of the industrial chain and supply chain. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Bureau of Statistics, etc.)
Promote "Industrial Internet + Green Low Carbon". We will carry out the construction of "industrial Internet + green low carbon" and support enterprises to speed up the transformation of internal and external networks. We will accelerate the construction of industrial big data application platform, cloud manufacturing service platform and Internet of Things collaborative platform, cultivate a number of comprehensive, characteristic and professional industrial Internet platform, and create industrial application scenarios and demonstration bases. Telecom enterprises, information service enterprises and industrial enterprises are encouraged to strengthen industrial cooperation and supply and demand docking, focusing on typical scenarios such as energy management, energy conservation and carbon reduction, and cultivating and popularizing standardized "industrial Internet + green low carbon" solutions and industrial application software. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Provincial SASASAC, Provincial Energy Bureau, etc.)
Strengthen energy conservation and carbon reduction of new infrastructure.Optimize the spatial layout of new infrastructure, overall planning, scientific allocation of data centers and other new infrastructure, to avoid low-level duplication of construction. Establish a life cycle assessment mechanism for new green infrastructure. Optimize the energy consumption structure of new infrastructure, adopt DC power supply, distributed energy storage, "photovoltaic + energy storage" and other modes, explore diversified energy supply, and increase the proportion of clean energy consumption. Improve the energy efficiency access threshold of new infrastructure and eliminate backward equipment and technology. Strengthen the management of energy consumption of new infrastructure, encourage data centers with annual comprehensive energy consumption exceeding 10000 tons of standard coal to be included in the online monitoring system of energy consumption of key energy-using units, and carry out energy measurement review. Promote the green upgrading and transformation of existing facilities, actively promote the use of efficient refrigeration, advanced ventilation, waste heat utilization, intelligent energy control and other technologies to improve the energy efficiency level of facilities. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Provincial Market Supervision Bureau, Provincial Energy Bureau, etc.)
3. Major actions
(1) Peak actions in key industries. Focus on key industries and industries with distinctive advantages in our province, clarify the path of carbon reduction, clarify the route of low-carbon development, implement policies in different industries, plan scientifically, and continuously promote the control of total carbon emissions and the reduction of carbon emission intensity. Steel Industry. We will strictly implement relevant regulations on capacity replacement and project filing, environmental impact assessment, and energy conservation assessment and review, and effectively control new iron and steel production capacity. Promote the optimization of the process structure of the iron and steel industry, promote the green upgrading of technology and equipment, and realize the efficient utilization of resources and energy. Strengthen industrial synergy and build a community of clean energy and steel industry. We will vigorously promote the demonstration of non-blast furnace ironmaking technology, improve the level of recycling and utilization of scrap steel resources, and promote the whole scrap steel electric furnace process. Optimize the product structure and increase the application proportion of low-carbon products with high strength and toughness, corrosion resistance and weather resistance, material saving and energy saving. We will strengthen the research and application of low coke ratio and high coal ratio smelting technology in blast furnaces, and encourage the development and application of high-efficiency pellet production technology, solvent-based pellet production, and high-efficiency use of raw lump ore in blast furnaces. We will encourage energy-saving steelmaking and steelmaking co-production, explore pilot demonstrations of hydrogen metallurgy and integration of carbon dioxide capture and utilization, and promote the development of low-grade waste heat heating. By 2025, the annual processing capacity of scrap steel will exceed 15 million tons, and the proportion of short process steelmaking will reach more than 40%. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial State-owned Assets Supervision and Administration Commission, Provincial Energy Bureau, etc.)
Building materials industry. Strengthen the supervision of capacity replacement, speed up the withdrawal of inefficient production capacity, strictly prohibit new production capacity of cement clinker and flat glass, and guide the transformation of building materials industry to light, intensive and product-oriented. Promote the orderly peak of cement, glass, ceramics, brick and tile industries. Promote the normalization of cement peak staggering production and reasonably shorten the operation time of cement clinker plant. Renewable energy such as wind and solar energy should be utilized according to local conditions, and the proportion of electricity and natural gas should be gradually increased. Building materials enterprises are encouraged to use fly ash, industrial waste residue, tailings and vanadium-titanium steel slag as raw materials or cement admixtures to improve the recycling rate of industrial by-products in the field of building materials. We will promote the application of energy-saving and consumption-reducing technologies for industrial kilns and furnaces such as pure oxygen, oxygen-enriched air, electric boosting and full electric melting, and energy-saving and carbon-reducing equipment such as cement high-efficiency grate coolers, high-efficiency energy-saving grinding, low-resistance cyclone preheaters, multi-line float glass kilns, and ceramic dry milling. We will accelerate the certification and application of green building materials, and strengthen the development and application of new cementitious materials, low-carbon concrete, wood and bamboo building materials and other low-carbon building materials. By 2025, the comprehensive energy consumption per unit product of cement clinker will be reduced by more than 1%. By 2030, the substitution level of raw materials and fuels will be greatly improved, and a number of green low-carbon production lines with synergistic effects of pollution reduction and carbon reduction will be transformed and constructed in cement, glass, ceramics and other industries, so as to realize the industrialization demonstration of carbon capture, utilization and storage technology in kilns. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial SASAC, Provincial Energy Bureau, etc.)
Chemical industry. We should optimize the scale and layout of production capacity and intensify the elimination of backward production capacity. Strict project access, rational arrangement of construction schedule, strict control of new production capacity of urea, ammonium phosphate, caustic soda, yellow phosphorus, calcium carbide and other industries, prohibition of new construction, reconstruction and expansion of oil refining and new ethylene, p-xylene, coal-to-olefin projects not included in the national industrial planning, give full play to the advantages of natural gas resources, increase natural gas (shale gas) exploration, and enhance the supply capacity of raw materials. We will steadily and orderly develop natural gas chemical industry and titanium lithium potassium chemical industry, and vigorously develop hydrogen energy chemical industry and new chemical materials represented by power battery materials. We should guide enterprises to change the way they use energy and encourage them to replace coal with electricity. Adjust the structure of raw materials, control the use of coal for new raw materials, expand the use of by-product hydrogen, and promote the lightening of petrochemical raw materials. Develop the technology of producing high-value chemicals from renewable energy. Optimize the product structure, promote the coordinated development of petrochemical industry and coal mining, metallurgy, building materials, chemical fiber and other industries, and strengthen the efficient utilization of refinery dry gas, liquefied gas and other by-product gases. Enterprises are encouraged to upgrade and transform energy conservation, promote cascade utilization of energy and material recycling, and promote diversified utilization of hydrogen energy. By 2025, the proportion of production capacity above the energy efficiency benchmark level in oil refining, ethylene, calcium carbide and other industries will reach 30%, and the proportion of production capacity above the energy efficiency benchmark level in synthetic ammonia industry will reach 15%. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial State-owned Assets Supervision and Administration Commission, Provincial Energy Bureau, etc.)
Non-ferrous metal industry. Strictly implement capacity replacement, strictly control new capacity, new construction and expansion of smelting projects must meet the industry standard conditions, and reach the advanced value of energy consumption quota standard. We will promote clean energy substitution and increase the proportion of hydropower, wind power and solar power applications. Accelerate the development of recycled non-ferrous metals industry, improve the recycling, sorting and processing network of waste non-ferrous metals resources, and increase the output of recycled non-ferrous metals. We will accelerate the promotion and application of advanced and applicable green low-carbon technologies, increase the proportion of short-process industries, continuously optimize process control, improve the level of waste heat recovery in the production of non-ferrous metals, and promote the continuous reduction of energy consumption per unit product. A number of technical renovation projects have been carried out, such as demonstration of high-quality anodes for aluminium, continuous blowing of copper matte, and magnesium smelting with large diameter plastic tank and double regenerative bottom slag tapping. It breaks through the technologies of smelting waste heat recovery, ammonia zinc smelting and sponge titanium subversive preparation. By 2025, the proportion of direct alloying of molten aluminium will reach 90%, and positive progress will be made in R & D and promotion of technologies such as efficient dissolution of alumina and waste heat recovery of electrolytic cells. By 2030, green low-carbon technology in the non-ferrous metal industry will be applied in a breakthrough way, and the proportion of renewable energy used in electrolytic aluminium will continue to increase. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial State-owned Assets Supervision and Administration Commission, Provincial Energy Bureau, etc.)
Paper industry. Promote the application of technologies such as efficient collection, storage and transportation of agricultural and forestry biomass residues, biomass pyrolysis and energy conversion, cooking with low energy consumption, multi-stage countercurrent washing and closed screening, efficient evaporation of black liquor, high-concentration combustion and efficient recycling of chemicals, shoe pressing, utilization of biomass solid waste and biogas, and drying of sludge waste heat. By 2025, the industrial concentration will be further improved, and the proportion of cogeneration will reach 85%. By 2030, the integration of energy and paper industry chain will be explored, and the proportion of cogeneration will reach more than 90%. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial Energy Bureau, etc.)
Textile industry. We will focus on developing intelligent, efficient and flexible preparation technologies for chemical fibers, promoting low-energy printing and dyeing equipment, and applying advanced technologies such as low-temperature printing and dyeing, small bath ratio dyeing, and continuous printing and dyeing of fabrics. Accelerate the recycling of waste textiles. By 2025, the output and proportion of differentiated high-quality green fibers will be greatly increased, the proportion of low temperature, short process printing and dyeing and low energy consumption technology will reach 50%, and the proportion of energy recycling technology will reach 70%. By 2030, the proportion of low energy consumption technology in printing and dyeing will reach 60%. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial Energy Bureau, etc.)
Electronics industry. Accelerate the high-end development of crystalline silicon photovoltaic industry, promote technological updates in key links, continuously reduce production energy consumption and costs, and improve the efficiency of crystalline silicon photovoltaic power generation. We will strengthen industrial agglomeration and low-carbon development, and further reduce the proportion of non-electric energy applications. Promote the chain development of silicon materials, silicon wafers, batteries and components, and form a coordinated industrial cluster in the upper, middle and lower reaches. Promote the innovation and development of thin film photovoltaic industry. Promote the R & D and industrial application of polysilicon closed-loop manufacturing technology, advanced crystal pulling technology and clean production technology of printed circuit board. By 2025, the proportion of non-electric energy in lithium-ion materials and optical fiber industries will be below 7% and 2% respectively. By 2030, the manufacturing energy consumption of electronic materials and electronic products will be significantly reduced. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial SASAC, Provincial Energy Bureau, etc.)
Equipment manufacturing industry. Focusing on the green and low-carbon needs of clean, energy-saving, environmental protection, energy equipment and other fields, we will focus on key energy-using processes and strengthen the integration and development of basic manufacturing processes such as advanced casting, forging, welding and heat treatment with new technologies. We will actively promote advanced near-net forming technologies such as integrated die-casting, die-less casting, hot forming of ultra-high strength steel, welding of heterogeneous materials, lightweight of lightweight high-strength alloys, and laser heat treatment. Pilot demonstrations of energy-saving and material-saving technologies such as anti-fatigue manufacturing and lightweight manufacturing will be carried out. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecological Environment, Provincial State-owned Assets Supervision and Administration Commission, Provincial Energy Bureau, etc.)
(2) Helping the whole society to reach its peak. Actively build a supply system of green low-carbon products, give full play to the supporting role of industrial products to the whole society, and help the whole society to achieve the goal of carbon peak smoothly. Increase the supply of green low-carbon products. The supply system of green products in the whole chain from basic raw materials to terminal consumer goods meets the demand for low-carbon products in the green and low-carbon development of the whole society. We will continue to cultivate a number of demonstration enterprises for green design of industrial products, and encourage enterprises to use green and low-carbon design methods and tools to develop and promote a number of high-performance, high-quality, lightweight, recyclable, degradable and low-carbon environmental protection products. We will intensify the certification and development of low-carbon products in industries with distinctive advantages, and expand the consumption of new energy vehicles, photovoltaic photothermal products, green consumer electrical and electronic products, and green building materials. Continue to promote energy-saving, water-saving, efficient and safe green intelligent household appliances. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Market Supervision Bureau, etc.)
Increase the supply of green low-carbon equipment. Research and development and promotion of industrial energy-saving equipment such as high-efficiency heating, energy-saving power, waste heat and pressure recovery and utilization, industrial environmental protection equipment such as low energy consumption, modularization, intelligent sewage, flue gas and solid waste treatment, and technological equipment such as source classification, process control and end treatment. We will develop complete sets of equipment for intelligent crushing, sorting and comprehensive utilization of industrial solid wastes such as new wall materials, copper and aluminum scrap, and intelligent disassembly and high-value recycling equipment for retired power batteries. Develop remanufacturing equipment such as construction machinery, heavy machine tools and internal combustion engines. Focus on Sichuan's green and low-carbon industries, focusing on the development of wind power, photovoltaic power, hydropower, nuclear energy, hydrogen energy, energy storage and other clean energy equipment. We will promote the R & D and industrialization of high-end photovoltaic equipment, complete sets of natural gas (shale gas) equipment, natural gas engineering equipment and high-end downhole tools. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Ecology and Environment, Provincial Energy Bureau, etc.)
Increase the supply of green low-carbon transportation.We will comprehensively build the supply chain of new energy automobile industry chain, vigorously develop the whole industry chain of lithium-ion batteries and power storage batteries, and accelerate the R & D and industrialization of key technologies such as power battery materials, monomers, modules and management systems. Cultivate and introduce the leading enterprises of new energy vehicles, support the transformation of traditional fuel vehicle enterprises, and form the mass production capacity of new energy vehicles. We will actively develop battery recycling, cascade utilization and resource recycling, explore large-capacity supercapacitor energy storage equipment, and introduce cutting-edge projects such as energy storage power stations, battery managers and electrical control. Speed up the construction of charging piles and the innovation of power exchange mode, and build a convenient, efficient and moderately advanced charging network system. We will implement actions to promote the electrification of vehicles in the public sector, and vigorously promote the demonstration and promotion of new energy vehicles in public transport, logistics and distribution, sanitation, school buses and other fields. By 2025, 800000 new energy vehicles will be promoted and applied. By 2030, the carbon dioxide emission intensity of new passenger and commercial vehicles will be reduced by more than 25% and 20% compared with 2020. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Science and Technology, Department of Transportation, etc.)
Increase the supply of green low-carbon building materials. Develop the certification and application of green building materials, formulate and issue technical specifications for the evaluation of low-carbon products such as cement, glass, ceramics, lime and wall materials, and improve the supply level of green low-carbon materials in the construction field. We will actively develop new cement products and new wall materials, encourage the development of ready-mixed mortar and high-performance concrete, and support the development and promotion of the application of waste rock, recycled slag and industrial by-product gypsum in building materials. We will promote the transformation of traditional building glass into high value-added products, properly develop photovoltaic glass and glass for transportation equipment, and encourage the development of electronic glass. Encourage the production of low-carbon cementitious materials, energy-saving doors and windows, environmentally friendly coatings, solid waste green concrete and other green building materials. We will increase investment in research and development of green building materials and key technologies, promote high-strength steel bars, high-performance concrete, high-performance masonry materials, structural insulation integrated wallboards, and encourage the development of prefabricated components and parts with excellent performance. Promote the priority selection of products with green building materials certification marks, and promote the coordinated development of green building materials and green buildings. We will carry out the establishment of pilot cities for green building materials and the action of green building materials going to the countryside. (Provincial Development and Reform Commission, Economic and Information Department, Science and Technology Department, Housing and Urban-Rural Construction Department, Provincial Market Supervision Bureau, etc.)
4. Policy guarantee
(1) Strengthen policy guidance. We will fully implement the national green and low-carbon development policy and build a green and low-carbon industrial development policy system in Sichuan Province. To formulate management measures for industrial energy-saving supervision, comprehensive utilization of industrial resources, recycling and utilization of power batteries for new energy vehicles, and construction of green manufacturing system, so as to promote the standardized development of key areas. Establish a green credit rating mechanism for enterprises, and increase the application of the evaluation results in finance, credit, pilot demonstration, etc. We will improve the information disclosure system for enterprise resource and energy consumption and carbon emissions, and promote enterprises to better fulfill their social responsibilities such as energy conservation, efficiency, pollution reduction and carbon reduction. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, etc.)
(2) Establishing an accounting system. Supporting industries, parks, enterprises and measurement technology institutions to consolidate the statistical foundation, improve the quality of work, carry out research on carbon emission accounting methodology according to their own characteristics, establish and improve the carbon emission measurement system based on the life cycle method, and compile measurement and testing standards and implementation rules. We will promote the development of carbon emission measurement technology, accelerate the application of new technologies such as remote sensing, big data and cloud computing in the field of carbon emission measurement technology, and improve the level of statistical accounting. Actively participate in the research of national and international carbon emission accounting methods, promote the establishment of a more fair, reasonable, unified and standardized carbon emission accounting method system, and provide the basis and means for the follow-up comprehensive deepening of greenhouse gas emission reduction in the industrial sector. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Statistical Bureau, etc.)
(3) Establishing a standard system. Give full play to the leading role of green low-carbon standard system, sort out and upgrade existing standards, dock with national standards, and establish and improve local standard systems such as low-carbon evaluation, low-carbon certification, carbon emissions, energy efficiency level and circular economy evaluation. Strengthen the implementation of standards and promote the evaluation of the implementation effect of standards. Supporting industry associations, enterprises, institutions and standardization professional institutions to actively undertake research projects on industrial energy-saving and green development standards, participating in the revision of national and industrial green low-carbon standards, and encouraging enterprises to formulate enterprise standards stricter than national, industrial and local standards. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Provincial Market Supervision Bureau, etc.)
(4) Strengthen fiscal and taxation support. We will implement preferential tax policies, give better play to the role of taxation in promoting green and low-carbon industrial development, and support the application and transformation of technologies in key areas such as low-carbon, energy-saving, water-saving, clean production, comprehensive utilization of resources and green manufacturing. We will actively implement green electricity price policies such as differential electricity price and ladder electricity price. Give full play to the role of "Green Rong Rong" green financial integrated service platform, encourage eligible financial institutions to make good use of carbon emission reduction support tools, and provide preferential interest rate financing for projects in key areas of carbon emission reduction. Support eligible green low-carbon enterprises to go public for financing, listing for financing and refinancing. We will encourage social capital to set up investment funds for green and low-carbon industries in a market-oriented manner, support the green transformation of traditional industries and pilot demonstrations of green and low-carbon industries, and accelerate the development of green and low-carbon industries. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Finance, Department of Ecological Environment, Sichuan Tax Bureau, Sichuan Branch of the People's Bank of China, etc.)
(5) Improve the market mechanism. We will actively participate in the national carbon emissions trading market, implement actions to enhance the capacity of the carbon market, foster and strengthen technical service institutions such as consultation, testing, verification and certification, as well as the team of carbon emissions administrators, and strengthen the supervision of the quality of enterprise carbon emissions data and the management of quota clearance. Actively participate in the construction of the national energy rights trading market, improve the system of paid use and trading of energy rights, and do a good job of linking up with the "double control" system of energy consumption. We will improve carbon emission reporting and information disclosure systems for enterprises and financial institutions, and innovate and promote carbon disclosure and carbon labeling. We will actively implement contract energy management and promote "one-stop" comprehensive service modes such as energy-saving consultation, diagnosis, design, financing, transformation and trusteeship. We will actively promote new specialized green service models such as green manufacturing system solutions, third-party low-carbon evaluation, entrusted management of carbon assets, and carbon emission accounting. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, etc.)
(6) Strengthen foreign cooperation. We will strengthen exchanges and cooperation with "the Belt and Road" countries in green technology, green equipment, green services and green infrastructure construction, and support leading enterprises in new energy development and energy equipment production to participate in international industrial chain supply chain cooperation. We will vigorously develop trade in high-quality, high-tech and high-value-added green products focusing on clean energy equipment, crystalline silicon photovoltaics and power batteries. We will comprehensively promote regional cooperation with Beijing, Tianjin, Hebei, the Yangtze River Economic Zone and the Guangdong-Hong Kong-Macao Greater Bay Area, and explore cooperation in building green factories and green industrial parks. We will expand cooperation with surrounding provinces (cities) such as Chongqing, Yunnan and Guizhou, and vigorously promote mutual recognition, information exchange and work interaction of the green low-carbon standard system. (Provincial Development and Reform Commission, Department of Economy and Information Technology, Department of Ecological Environment, Department of Commerce, Provincial Economic Cooperation Bureau, etc.)
5. Organization and implementation
(1) Strengthen overall promotion. Municipalities (prefectures) should thoroughly implement the decision-making and deployment of the Party Central Committee, the State Council, provincial Party committees and provincial governments on carbon peak and carbon neutralization work, formulate and promulgate relevant plans in the region in light of actual conditions, and establish an industrial carbon peak work system with clear responsibilities, orderly coordination and strong supervision. Relevant responsible departments should strengthen coordination and cooperation, strengthen work guidance and form policy synergy in accordance with the principle of "overall coordination and division of responsibilities". According to the unified deployment of the state, we should study and establish a "double-control" assessment mechanism for carbon emission intensity and total amount, strengthen supervision and assessment, and force green and low-carbon transformation and upgrading in the industrial field.
(2) Strengthen the implementation of responsibilities. Municipalities (prefectures) and relevant responsible departments should have a deep understanding of the importance, urgency and complexity of carbon neutralization work, and focus on the implementation of various tasks in accordance with the decision-making and deployment of provincial Party committees and provincial governments and the main objectives and key tasks set out in this plan, so as to ensure that policies, measures and results are in place. State-owned enterprises should study and formulate the implementation plan and route of carbon peak, decompose and implement tasks and measures, take the lead in building a carbon emission information disclosure system, and play a leading role. Relevant industry organizations should give full play to the role of bridge and link, and strengthen the guidance and service to enterprises.
(3) Cultivating talents. We will actively cultivate third-party service institutions and market intermediary organizations, develop social organizations related to low-carbon industries, support qualified institutions of higher learning, scientific research institutions, enterprises and relevant professional institutions of the state, and establish or jointly build green low-carbon technology centers or innovation centers. We will deepen the integration of industry and education, encourage schools and enterprises to jointly carry out collaborative education projects, and accelerate the training of green and low-carbon technology research and development, industrial management, international cooperation, policy research and other professionals. Strengthen the training of leading cadres and business managers at all levels on climate change and low-carbon development, enhance their ability to promote green and low-carbon development, and improve their scientific decision-making ability.
浙公网安备33010802003254号