Recently, Jiangsu Province issued the "Jiangsu Province Industrial Sector and Key Industries Carbon Peak Implementation Plan", which calls for ensuring that carbon dioxide emissions in the industrial sector of the province reach their peak by 2030, and that carbon dioxide emissions in key industries such as iron and steel, petrochemical industry, building materials, textiles and papermaking strive to take the lead in reaching their peak.
For the cement building materials industry, the requirements are as follows:
1. Accelerate the upgrading of products. Develop cement intensive processing products, strengthen the research and development of special cement, ecological cement, low-carbon concrete and functional concrete products, improve 42. Vigorously develop new wall materials, waterproof, thermal insulation and airtight integrated materials, high-performance precast piles and other green building materials, promote the application of photovoltaic building integration and prefabricated parts, and promote the development of photovoltaic building integration and prefabricated parts. Local governments are encouraged to give priority to purchasing green building materials and assembly building materials in construction projects such as livelihood projects and beautiful countryside. Support building materials enterprises to expand their product range and extend the industrial chain from materials to products, engineering and services. (Provincial Industry and Information Technology Department, Provincial Housing and Urban-Rural Construction Department, Provincial Development and Reform Commission, etc. Are responsible for the division of responsibilities)
2. Accelerate the optimization of energy structure. Renewable energy such as wind and solar energy should be used according to local conditions to gradually increase the proportion of clean energy consumption in the building materials industry. Promote low-cost and large-scale pretreatment technologies such as biomass fuels and domestic waste, develop research and development of energy application solutions such as alternative raw materials, alternative fuels and waste heat power generation, support a high proportion of combustible wastes such as refuse-derived fuels, plastics, rubber and biofuels to replace coal, and improve the recovery and classification of combustible wastes. Promote the high calorific value, low cost and standardized pretreatment of alternative fuels, and improve the coal substitution rate of building materials industry. (Provincial Development and Reform Commission, Provincial Department of Industry and Information Technology, Provincial Department of Housing and Urban-Rural Construction, etc. Are responsible for the division of responsibilities)
3. Accelerate technological innovation. The cement industry will accelerate breakthroughs in energy-saving and consumption-reducing technologies such as cement suspension boiling calcination and low waste heat utilization, and promote the popularization and application of energy-saving technologies and equipment such as low-resistance cyclone preheater, high-efficiency firing, kiln optimization control, high-efficiency grate cooler and high-efficiency energy-saving grinding. The glass industry has accelerated the application of key technologies such as multi-line technology in one float glass kiln, preheating technology outside the glass kiln, hydrogen calcination in the kiln, high-quality float glass coating technology, and pure oxygen + electric melting composite combustion. The industry of wall materials and prefabricated parts promotes standardized design, factory production and mechanized construction. The rock wool industry has accelerated the promotion of electric melting production technology and technical equipment. The lime industry has accelerated the promotion of energy-saving technology and equipment such as double-chamber vertical kilns. The wall material industry has accelerated the promotion of kiln sealing, thermal insulation and energy-saving technology and equipment. (Provincial Industry and Information Technology Department, Provincial Housing and Urban-Rural Construction Department, Provincial Science and Technology Department, etc. Are responsible for the division of responsibilities)
4. Accelerate the utilization of solid waste resources. Give full play to the advantages of harmless waste absorption in building materials industry, increase the proportion of solid waste resources replacing clinker in cement grinding process, increase the proportion of solid waste such as hot slag and industrial slag in mineral wool production, and improve the utilization level of solid waste in the production process of building materials such as glass fiber, concrete, roadbed filling materials and new walls. Promote the technology of co-disposal of domestic waste and industrial solid (hazardous) waste in cement kilns. Promote the recycling level of building materials industry cluster, and create industrial chains and industrial clusters such as "industrial production → waste residue → building materials", "construction waste → pavement materials → building materials" and "crop waste → biomass building materials".
The following is the original text:
Jiangsu Provincial Department of Industry and Information Technology Jiangsu Provincial Development and Reform Commission
Jiangsu Provincial Department of
Ecology and Environment January 12
, 2023 The implementation plan
of carbon peak in the industrial field and key industries of Jiangsu Province is to thoroughly implement the major strategic decisions of the provincial Party Committee and the provincial government on carbon peak and carbon neutralization, and accelerate the green and low-carbon transformation and development of industry. This implementation plan is formulated in accordance with the Provincial Party Committee and the Provincial Government's Opinions on Promoting High-quality Development and Implementing Carbon Peak Neutralization Work and the Provincial Government's Implementation Plan for Carbon Peak in Jiangsu Province.
1. General requirements
(1) The guiding ideology
adheres to Xi Jinping Thought on Socialism with Chinese Characteristics for a New Era as a guide, comprehensively implements the spirit of the 20th National Congress of the Communist Party of China, thoroughly practices the thought of ecological civilization of Xi Jinping, and implements the guiding spirit of the General Secretary of Xi Jinping in his important speech on Jiangsu work. Closely adhere to the goal of "strong, rich, beautiful and high" and the requirement of "striving to be an example, striving to be a model and to be in the forefront", based on the new stage of development, implement the new development concept completely, accurately and comprehensively, serve to build a new development pattern, adhere to the concept of system, coordinate industrial development and emission reduction, overall and local, long-term and short-term goals. We will unswervingly follow the high-quality development path of ecological priority and green low-carbon, accelerate low-carbon technological innovation, promote low-carbon industrial transformation, strengthen the efficient use of resources, strengthen low-carbon energy security, and build a modern green industrial system characterized by high efficiency, recycling and low-carbon, so as to ensure that the carbon peak is achieved on schedule.
(2) The basic principles
are systematic planning, stable and orderly. The target vision of carbon peak and carbon neutralization runs through the process reengineering and mode innovation of the whole process and all links of the industrial chain and supply chain, overall planning and systematic promotion, accelerating the green low-carbon cycle development of industry, and steadily and orderly promoting the carbon peak in the industrial field on the basis of maintaining the basic stability of the proportion of manufacturing industry and the safety of the industrial chain and supply chain. Give priority to
saving and implement classified measures. Put energy and resources conservation in the first place, continuously reduce energy consumption and carbon emissions per unit output, improve input-output efficiency, and form an effective carbon emission control valve from the source and entrance. We should adhere to the principle of adapting measures to local conditions and taking classified measures to promote the orderly peak of all regions and industries.
Overall promotion and key breakthroughs. We will strengthen the systematicness and synergy of carbon peak work in the industrial sector and promote a comprehensive green and low-carbon transformation in all regions and industries. Focus on key industries such as iron and steel, petrochemical industry and building materials, accelerate technological innovation and structural adjustment, and strive to take the lead in achieving carbon peak.
Technological innovation and digital empowerment. Focus on the key core technologies of green low-carbon cycle development, improve the system and mechanism to support scientific and technological innovation and its transformation and application, promote low-carbon frontier technology research and industrial iterative upgrading, and support the development of carbon peak and carbon neutral technology in an all-round way. Promote digitalization, intellectualization and greening, and accelerate the low-carbon transformation of industry with information technology.
Policy-led and market-led. We should give full play to the guiding role of the government in pilot demonstration and factor input, and strengthen the supervision function of government services. Give full play to the role of market mechanism, stimulate the vitality of enterprises, and continue to build a low-carbon industrial development promotion mechanism with enterprises as the main body and market as the leading factor.
2. During
the 14th Five-Year Plan period, positive progress has been made in the adjustment and optimization of industrial structure, the utilization efficiency of energy resources has been greatly improved, green low-carbon technologies, equipment, processes and products have been widely used, and the level of green manufacturing has been rapidly improved by digitalization and intellectualization. The modern industrial system of green low-carbon cycle development has initially taken shape. By 2025, the energy consumption per unit of industrial added value above the scale will be reduced by 17% compared with 2020, and the carbon dioxide emissions per unit of industrial added value will be reduced by 20% compared with 2020. The energy efficiency of key industries will reach the international advanced level, and the carbon dioxide emissions will be effectively controlled, laying a solid foundation for achieving the peak of carbon dioxide emissions. During
the "15th Five-Year Plan" period, the layout of industrial structure was further optimized, green low-carbon industry became an important pillar, carbon dioxide emissions per unit output value of major industrial products continued to decline, and the transformation and development of green low-carbon industry achieved remarkable results. To ensure that carbon dioxide emissions in the industrial sector of the province reach their peak by 2030, carbon dioxide emissions in key industries such as iron and steel, petrochemical, building materials, textiles and papermaking will strive to take the lead in reaching their peak.
3. Main tasks
(1) Deep adjustment of industrial structure and acceleration of low-carbon transformation
1. Optimizing the layout of key regions. Strengthen the "chess game" of industrial development in the whole province, give full play to the advantages of all regions, and actively promote Jiangsu manufacturing to accelerate to the middle and high end of the global value chain. We will promote high-standard cultivation of advanced manufacturing clusters along the Yangtze River, such as new power equipment, software and information services, the Internet of Things, new nano-materials and new carbon materials, and build a high-end manufacturing industrial belt in the northern wing of the Yangtze River Delta. We will vigorously develop new coastal marine engineering equipment, high-tech ships, marine pharmaceuticals and biological products, desalination equipment and other marine industries, promote the high-end green development of port-vicinity industries such as chemical industry and iron and steel industry, and strive to build a high-level industrial development demonstration belt. Accelerate the green development of industries in northern Jiangsu, support the construction machinery, biomedicine, brewing (wine) and other superior industrial chains in northern Jiangsu, and accelerate the revitalization and development of traditional characteristic industries according to local conditions. [The Provincial Development and Reform Commission and the Provincial Department of Industry and Information Technology are responsible for the division of responsibilities, and the municipal governments with districts are responsible for the implementation (the following tasks need to be implemented by the municipal governments with districts, and will not be listed one by one)]
2. Resolutely curb the blind development of high energy consumption, high emission and low level projects. Strong measures should be taken to implement inventory management, classified disposal, dynamic supervision and early warning of high energy consumption, high emission and low level projects. Strictly implement the deployment and requirements of provincial Party committees and provincial governments to resolutely curb the blind development of "two high" projects, and regularly carry out the investigation of "two high" projects. Improve the energy consumption access standards of "two high" projects, strengthen the management of ecological environment access, strictly control the new "two high" projects, and the new "two high" projects must conform to the national industrial policy and reach the international advanced level of energy efficiency. For the proposed "two high" projects with saturated industrial capacity, the energy consumption should not be less than 1. For the "two high" projects in areas where the energy consumption intensity does not decrease but increases, the approval should be postponed and limited, the normal supervision should be strengthened, and the "two high" projects that do not meet the requirements should be resolutely won. (The Provincial Development and Reform Commission takes the lead, and the Provincial Department of Industry and Information Technology, the Provincial Department of Natural Resources and the Provincial Department of Ecological Environment are responsible for the division of responsibilities)
3. Accelerate the transformation and upgrading of traditional industries. We will carry out renewal projects for traditional industries such as iron and steel, petrochemical industry, building materials, coal and electricity, textiles and papermaking. With the goal of building an environment-friendly and resource-saving modern enterprise, we will further promote energy conservation and emission reduction, integration of two modernizations, product structure adjustment and technological innovation in traditional manufacturing industry, accelerate the realization of high-end, green and intelligent, and strive to move towards the middle and high-end of the value chain. Strengthen the coupling development between traditional industries, promote industrial circular links, encourage leading enterprises to carry out coordinated carbon reduction actions with upstream and downstream enterprises, enterprises in parks and industries, and build an industrial chain in which enterprises are connected end to end, supply and demand, and interconnected. We will strengthen the integration and coupling innovation of emerging industries such as integrated circuits, artificial intelligence, 5G and big data with traditional industries, promote the deep integration of green manufacturing and information technology, and lead the green and low-carbon cycle development of traditional industrial production methods. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission and the Provincial State-owned Assets Supervision and Administration Commission are responsible for the division of responsibilities)
(2) Building a modern industrial chain and fostering low-carbon industries
1. Enhancing the competitiveness of superior industrial chains. Focusing on the deep layout of the industrial chain of low-carbon transformation, we will further implement the action of strengthening the industrial chain, consolidate and enhance the overall competitiveness of the industrial chain of UHV equipment, biomedicine, crystalline silicon photovoltaic, wind power equipment, high-end textiles and high-tech ships in the direction of low-carbon, digitalization, high-end and intellectualization, and strengthen the advantages of the industrial chain of integrated circuits, rail transit, 5G and new medical devices. Promote a number of independent intellectual property rights layout to support the upgrading of green technology in the industry, and create a number of complete or terminal products in line with the trend of technological change in the future low-carbon industry. (The Provincial Department of Industry and Information Technology and the Provincial Development and Reform Commission are responsible for the division of responsibilities)
2. Cultivate and strengthen the emerging industrial chain. We will strengthen basic research support, promote technological empowerment such as the Internet, big data, artificial intelligence and the Internet of Things, and constantly expand the scale of strategic emerging industries such as energy conservation and environmental protection, biotechnology and new medicine, new energy vehicle manufacturing and aviation equipment. Focusing on key areas such as high-efficiency photovoltaic manufacturing, offshore wind energy, bio-energy, smart grid, energy storage and smart cars, we will cultivate a number of leading new energy equipment manufacturing enterprises leading the development of green industry. In the frontier technology fields of gene technology, space and ocean development, quantum science and technology, hydrogen energy and energy storage, we will implement the future industrial cultivation plan and build the future low-carbon industrial pilot area. We will accelerate the development of carbon sequestration industry, strengthen the research and development of negative carbon technology with carbon capture, utilization and storage (CCUS) as the core, and advance the research and development and manufacturing of equipment for carbon dioxide capture, storage, recovery and resource utilization. (The Provincial Development and Reform Commission and the Provincial Department of Industry and Information Technology are responsible for the division of responsibilities)
(3) Building a low-carbon innovation system to promote technological carbon reduction
1. Promoting major breakthroughs in green low-carbon technologies. We will accelerate the construction of a low-carbon, zero-carbon and negative-carbon technological innovation system with enterprises as the main body, industry-university-research collaboration, and upstream and downstream collaboration. Focusing on the directions of efficient carbon capture, utilization and storage, transformative zero-carbon energy, coordinated control of environment and climate, carbon sequestration and sink increase, a number of frontier basic research projects have been deployed and implemented in advance, striving to achieve original and leading results. Focusing on the goal of building a clean, low-carbon, safe and efficient modern energy system, the integration of superior forces has accelerated the breakthrough of a number of key technical bottlenecks, such as high-efficiency and low-cost solar cells, deep-sea wind energy utilization, and large-scale hydrogen production based on renewable energy. Facing the urgent needs of energy saving and emission reduction in high-carbon industries such as iron and steel, petrochemical industry and building materials, we should accelerate the breakthrough of zero-carbon industrial process reengineering technology and promote zero-carbon or low-carbon substitution of high-carbon industrial processes. Focusing on the key technologies and equipment that restrict the improvement of industrial energy efficiency, we will promote the development and mastery of a number of core energy efficiency technologies with independent intellectual property rights and advanced domestic and international levels in the fields of high-efficiency motor and drive equipment, waste heat and pressure utilization, intelligent optimization control and smart grid. Integrate superior resources, actively promote the construction of key laboratories, new R & D institutions and other basic frontier innovation platforms, create a number of industry low-carbon technology innovation centers and other carriers, and form a strong sustainable supply capacity of common technology. (The Provincial Department of Science and Technology takes the lead, and the Provincial Development and Reform Commission and the Provincial Department of Industry and Information Technology are responsible for the division of responsibilities)
2. Strengthen the promotion of green low-carbon technology. We will regularly publish the catalogue of new green low-carbon technologies and products that the province focuses on promoting and applying, organize the formulation of technology promotion programs and supply and demand docking guidelines, and promote the promotion and application of advanced and applicable new industrial low-carbon technologies, new processes, new equipment and new materials. Focusing on steel, petrochemical, building materials and other industries, we will focus on key technologies such as low-carbon raw material substitution and short-process manufacturing, promote technological innovation and equipment transformation in production and manufacturing, and reduce greenhouse gas emissions in industrial processes. All regions and industries are encouraged to actively explore new mechanisms for the promotion of green low-carbon technologies. (Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission, Provincial Department of Ecological Environment and Provincial Department of Housing and Urban-Rural Construction are responsible for the division of responsibilities)
3. Carry out demonstration of green low-carbon technology transformation. Focusing on iron and steel, petrochemical, building materials, coal and electricity, textile, papermaking and other industries, we will implement green low-carbon technology demonstration projects such as deep decarbonization of production processes, substitution of raw materials and fuels, industrial process reengineering, carbon dioxide recovery and recycling, and development of carbon sequestration products. We will organize and implement demonstration projects for the application of special steel in typical industries, special steel for key industrial infrastructure components, green low-carbon manufacturing processes, and renewable fuel substitution in the cement industry, so as to promote substantial emission reduction and pollution reduction in high-carbon industries. We will carry out green low-carbon demonstration projects, focusing on the construction of demonstration projects such as "photovoltaic plus", micro-grid application, hydrogen storage and hydrogen station pilot projects, convenient battery charging infrastructure, near-zero emissions, carbon dioxide capture and high-value utilization pilot projects. Give full play to the leading role of leading enterprises, and form a number of replicable and popularizable industry programs and technical experience. (Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission, Provincial Department of Science and Technology, Provincial Department of Ecology and Environment, Provincial Department of Housing and Urban-Rural Construction, etc. Are responsible for the division of responsibilities)
(4) Strengthen energy conservation and emission reduction efforts to promote low-carbon development
1. Strengthen the main responsibility of enterprises for energy conservation. To clarify the energy-saving management and target responsibility of key energy-using units, continue to deepen energy-saving and carbon reduction in key industries, and ensure the completion of total energy consumption and intensity control targets. Enhance the basic energy-saving capacity of enterprises, formulate and improve energy-saving management regulations, clarify energy management responsibilities, promote the construction of energy management system and energy consumption online monitoring and control system, strengthen the use of data, and realize the wisdom of energy management. Improve the energy-saving level of enterprises, tap the energy-saving potential, carry out energy audit, report the energy utilization status on time, and eliminate backward production technology and energy-using equipment. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission is responsible for the division of responsibilities)
2. Strengthen the energy-saving technological transformation of traditional industries. We will strengthen the management of energy use in iron and steel, petrochemical, building materials, coal and electricity, textile and papermaking industries, promote technological innovation in enterprises and implement green transformation of key industries. Focus on organizing and implementing projects such as comprehensive improvement of energy conservation and environmental protection of coal-fired boilers, green lighting, energy system optimization, and comprehensive energy efficiency improvement of key energy-using units, so as to promote comprehensive cascade utilization of energy. We will accelerate the application of advanced energy-saving and low-carbon technologies and equipment, and improve the energy efficiency of key general equipment systems such as boilers, transformers, motors, pumps, fans and compressors. Deeply carry out the leading action of energy efficiency in the industrial field, select and publish the list of "leaders" of energy efficiency in key industries, and promote key energy-using enterprises to continue to catch up with and lead.(The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Department of Ecology and Environment and the Provincial Market Supervision Bureau are responsible for the division of responsibilities)
3. Improve the energy-saving supervision and service mechanism. Establish and improve the "trinity" energy-saving management system of energy-saving management, supervision and service, strengthen the construction of energy-saving supervision capacity system at provincial, municipal and county levels, and focus on improving the capacity level of energy-saving supervision institutions and law enforcement teams. Establish a link between energy conservation supervision and management systems such as credit evaluation and energy conservation review of energy-using units, and improve the normal energy conservation supervision mechanism. Comprehensive use of administrative penalties, credit supervision, green electricity prices and other means to enhance the binding force of energy conservation supervision. Promote the development of energy-saving service industry, build a market service platform for technological demand and technological innovation supply, and actively promote energy-saving technologies and products. Extensively carry out energy-saving service activities in enterprises, and organize industrial energy-saving diagnosis combining comprehensive diagnosis and special diagnosis around major processes, key energy-using systems and key technical equipment. Taking the access value and limit value determined by the current national energy-saving standards as a reference, the energy efficiency benchmark level of each industry is delimited step by step, and the proposed construction projects, stock projects and backward projects are classified to improve the efficiency and meet the standards, so as to comprehensively improve the energy efficiency level of enterprises. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission, the Provincial Department of Ecology and Environment and the Provincial Market Supervision Bureau are responsible for the division of responsibilities)
(5) Optimizing the way of energy utilization and improving the efficiency
of energy use 1. Promoting the substitution of non-fossil energy. Supporting enterprises to use renewable energy such as solar energy, biomass energy and geothermal energy to develop integrated projects such as distributed generation, multi-energy storage, high-efficiency heat pump, waste heat and pressure utilization, and intelligent energy management and control, so as to promote the efficient complementary utilization of multi-energy. Supporting development zones (parks) with large industrial load and better new energy conditions to carry out the construction of green power supply development zones (parks) integrating source, network, load and storage, and encouraging parks and enterprises to build micro-grids and micro-energy networks. We will actively absorb clean power outside the region, develop nuclear power safely and efficiently, and strive to improve the supply capacity of green power. [Provincial Development and Reform Commission (Provincial Energy Bureau), Provincial Department of Industry and Information Technology, Provincial Department of Natural Resources and Provincial Department of Housing and Urban-Rural Construction are responsible for the division of responsibilities]
2. Improve the level of industrial electrification. Encourage qualified enterprises to replace traditional production processes with advanced power production processes, expand the proportion of electrified terminal energy-using equipment, and continuously improve the level of electrification in the industrial field and key industries. Industrial enterprises in key industries should be guided to strengthen the transformation of electrical equipment and information construction, strengthen power demand side management, carry out the establishment of power demand side management demonstration enterprises (parks) and product (technology) selection, and comprehensively improve energy efficiency and demand response capability in the industrial field. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission is responsible for the division of responsibilities)
(6) Improving the efficiency of resource utilization and building a circular economy
1. Promoting the efficient and high-value utilization of renewable resources. We will accelerate the construction of a recycling system for renewable resources, promote the gathering of resource elements to superior enterprises, and guide the standardized development of renewable resources utilization enterprises. Encourage the construction of renewable resources industrial parks, cultivate and develop leading enterprises, guide small and micro enterprises to enter the parks, actively develop high-value renewable products, and focus on extending the industrial chain of renewable resources. We will implement the extended producer responsibility system, speed up the construction of a recycling system for waste resources, and promote traditional sales enterprises, e-commerce companies, logistics companies and other entities to establish a reverse logistics recycling system using sales and distribution networks. Promote regional cooperation and encourage recycling enterprises to establish strategic cooperation with the utilization enterprises of the national "urban mineral resources" demonstration base. Encourage the joint establishment of renewable resources utilization bases to realize the centralized, efficient and high-value utilization of renewable resources in the region and industry. (Provincial Development and Reform Commission, Provincial Department of Industry and Information Technology, Provincial Department of Finance, Provincial Department of Ecological Environment, Provincial Department of Commerce and Provincial Market Supervision Bureau are responsible for the division of responsibilities)
2. Strengthen the comprehensive utilization of solid waste. We will promote the utilization of large industrial solid wastes as resources, focusing on large industrial solid wastes such as fly ash, industrial by-product gypsum, steel slag, chemical waste residue, metallurgical dust and sludge, and desulfurized ash, and accelerate the promotion of large-scale and high-value comprehensive utilization technologies and equipment. Actively expand the application of comprehensive utilization products in metallurgy, building materials, infrastructure construction, underground goaf filling, soil treatment, ecological restoration and other fields. We will promote the recycling and planning development of waste plastics and rubber, accelerate the industrialization of chemical recycling technologies such as pyrolysis and depolymerization of waste plastics, and vigorously promote intelligent green pyrolysis of waste tires and deep processing of carbon black. Promote the regional co-disposal of large industrial solid waste, rely on leading enterprises, promote the construction of industrial resources comprehensive utilization base, and explore the industrial development model of industrial solid waste comprehensive utilization based on regional characteristics. We will implement the integrated development strategy of the Yangtze River Delta, strengthen cross-regional coordination, and expand the scale of comprehensive utilization. (Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission, Provincial Department of Ecological Environment and Provincial Market Supervision Bureau are responsible for the division of responsibilities)
(7) Actively promote green manufacturing and create carbon reduction models
1. Increase the development of green low-carbon products. Promote the development of green low-carbon products, carry out green design demonstration pilot projects, systematically control the negative impact of product life cycle on resources and environment from the design source stage, and realize the minimization of energy and resource consumption, the minimization of ecological environment impact and the maximization of renewable rate. Select a large number of products that are closely related to consumers and have mature conditions, carry out green design demonstration, increase the supply of green low-carbon products, and create a number of green low-carbon design demonstration enterprises. Benchmark the EU emission baseline level, and promote key enterprises to carry out pilot product carbon emission benchmarking and carbon footprint certification. (Provincial Development and Reform Commission, Provincial Department of Industry and Information Technology, Provincial Department of Ecological Environment and Provincial Market Supervision Bureau are responsible for the division of responsibilities)
2. Building green factories. Promote the construction of green factories, cultivate green manufacturing benchmarks in an all-round way and improve the overall green level of the industry in accordance with the principles of intensive plant, harmless raw materials, clean production, waste recycling and low-carbon energy. Implementing dynamic management of green factories, exploring the classification of star evaluation of green factories, encouraging green factories to compile annual reports on green low-carbon development, and exploring the construction of "near-zero carbon factories" and "carbon neutral factories". We will guide green factories to upgrade their standards and create a number of "super energy efficiency" factories at the international advanced level. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Department of Ecology and Environment and the Provincial Market Supervision Bureau are responsible for the division of responsibilities)
3. Build a green industrial park. Promote the construction of green parks, cultivate a number of green parks with strong innovation ability and good demonstration and leading role, and form a green development model of industrial parks with different characteristics. Promote the planning and construction of the coupling symbiosis system in the park, the circular production of enterprises in the park and the circular combination of industries, organize enterprises to implement cleaner production transformation, promote the comprehensive utilization of waste, the cascade utilization of energy and the recycling of water resources, and promote the resource utilization of industrial residual pressure and waste heat, waste gas and waste residue. In accordance with the principle of "one park, one policy", we will promote the completion of national demonstration pilot projects for recycling transformation of parks, and build a number of national green industry demonstration bases and provincial green low-carbon recycling development demonstration zones. Establish a low-carbon oriented evaluation index, select a number of industrial parks with good foundation, characteristics and strong representativeness to explore the construction of carbon peak, carbon neutral and advanced models. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
4. Build a green low-carbon supply chain. Promote the construction of green low-carbon supply chain, take leading enterprises in the industry as the core, take green supply standards and extended producer responsibility system as the support, accelerate the establishment of resource-saving, environment-friendly, energy-saving and low-carbon oriented procurement, production, marketing, recycling and logistics system, and establish a green low-carbon supply chain management system. Supporting leading enterprises with great influence and high management level in automobile, electronics, chemical industry, machinery, large-scale complete sets of equipment and other industries, carrying out the construction of green low-carbon supply chain demonstration enterprises, and creating a number of state-level green supply chain management enterprises. (Provincial Development and Reform Commission, Provincial Department of Industry and Information Technology, Provincial Department of Ecology and Environment, Provincial Department of Transportation and Provincial Department of Commerce are responsible for the division of responsibilities)
(8) Deepening the integration of digital technology and stimulating the potential
of carbon reduction 1. Promoting the deep integration of the new generation of information technology and manufacturing industry. Focusing on the core needs and key scenarios of intelligent transformation and digital transformation of manufacturing industry, we will promote the development of 5G, industrial Internet identification, cloud computing, artificial intelligence and other digital technologies in the whole chain and all-factor enabling manufacturing industry, and adhere to the parallel promotion of intelligent transformation, digital transformation and network promotion of manufacturing enterprises. Supporting key enterprises to promote technological innovation, equipment upgrading and business process reengineering, and building intelligent demonstration workshops with full digital connection and intelligent manufacturing demonstration factories with intelligent upgrading of the whole manufacturing process. We will carry out pilot demonstrations on the integration of new generation information technology and manufacturing industry, and accelerate the application and promotion of digital low-carbon solutions. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission, the Provincial Department of Science and Technology and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
2. Strengthen the supervision of information technology carbon emissions. We will continue to promote the construction of industrial Internet, realize the full connection of industrial equipment, and use the industrial Internet identification and analysis system to promote the integration of systems and form a complete data link. Coordinating green low-carbon basic data and industrial big data resources, establishing provincial data sharing mechanism, gathering industrial economic and low-carbon data, and using blockchain and other technologies to support energy and carbon emissions monitoring and analysis.Accelerate the application of industrial Internet identification in energy consumption and carbon emission management, develop and deploy carbon emission data monitoring tools, and establish a basic database of carbon emissions throughout the product life cycle. Focus on typical scenarios such as energy management, energy conservation and carbon reduction, cultivate and develop standardized "industrial Internet + green low carbon" solutions and industrial App, and promote the green transformation of industries and regions through scale promotion. (The Provincial Development and Reform Commission, the Provincial Department of Industry and Information Technology, the Provincial Department of Ecology and Environment, and the Provincial Bureau of Statistics are responsible for the division of responsibilities)
3. Promote energy conservation and carbon reduction in new infrastructure such as data centers and 5G. Optimize the spatial layout of new infrastructure, strengthen the classified guidance and intensive use of data centers, promote the co-construction and sharing of 5G networks, and avoid low-level duplication of construction. To meet the international advanced level, we should speed up the improvement of energy efficiency standards for communication, computing, storage and transmission equipment, establish and improve the standard system of green data centers, strengthen energy consumption monitoring and overall planning of indicators, improve the energy efficiency level of data centers, and control the power utilization efficiency indicators of data centers in 1. Eliminate backward equipment and technology. We will tackle key green and low-carbon core technologies, actively promote the use of low-power products and technologies such as high-efficiency refrigeration, advanced ventilation, waste heat utilization and intelligent energy control, and improve the energy efficiency of facilities. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission, the Provincial Department of Ecology and Environment, and the Provincial Market Supervision and Administration are responsible for the division of responsibilities.)
4. Key industries, such as
iron and steel, petrochemical industry, building materials, textiles and papermaking, are the key industries that produce carbon emissions in the industrial field. Accelerating the promotion of carbon peak in key industries is of great significance to the realization of carbon peak in the industrial field of the province.
(1) Iron and steel
1. New iron and steel production capacity is strictly prohibited. We will further deepen the supply-side structural reform of the iron and steel industry, strictly implement relevant regulations on capacity replacement and project filing, environmental impact assessment, and energy conservation assessment and review, and effectively control iron and steel production capacity. Strictly enforce laws and regulations on environmental protection, energy consumption, quality, safety and technology, and use comprehensive standards to promote backward production capacity in accordance with the law and regulations. We will further optimize the layout of the iron and steel industry, guide the orderly transfer of iron and steel production capacity, and focus on building a new pattern of coordinated development along the Yangtze River and coastal areas. (The Provincial Development and Reform Commission, the Provincial Department of Industry and Information Technology and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
2. Continue to promote upgrading. Promote the high-quality and efficient utilization of scrap steel resources and guide the development of electric furnace steelmaking in an orderly manner. Encourage qualified blast furnace-converter long process enterprises to transform locally and develop electric furnace short process steelmaking. By 2025, the proportion of short process steelmaking will reach more than 20%. Supporting iron and steel enterprises to aim at the upgrading of downstream industries and the development of strategic emerging industries, focusing on the development of high-quality special steel, special alloy steel for high-end equipment, steel for core basic components and other key steel products in small batches and varieties, and enhancing the independent and controllable production and R & D capabilities of high-end iron and steel materials. (The Provincial Development and Reform Commission takes the lead, and the Provincial Department of Industry and Information Technology, the Provincial Department of Science and Technology and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
3. Actively promote green low-carbon technologies. In the field of process flow, we will focus on deepening the application of hot charging, hot delivery and ultra-thin strip, promoting low-carbon technologies such as endless rolling, high proportion pellet smelting, blast furnace oxygen smelting, oxygen-enriched combustion and hydrogen energy metallurgy, and accelerating the popularization and application of advanced and applicable low-carbon technologies. In the field of frontier technology, research and innovation actions are carried out around the frontier directions of carbon capture, utilization and storage, efficient energy conversion technology, biomass carbon metallurgy, coordinated treatment of carbon dioxide and pollutants in iron and steel flue gas, and utilization of low-quality waste heat resources in iron and steel process. (The Provincial Development and Reform Commission, the Provincial Department of Industry and Information Technology, the Provincial Department of Science and Technology and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
4. Build a circular economy industrial chain. Further broaden the recycling and circulation channels of scrap steel, strengthen the screening and classification of scrap steel, improve the processing and preheating process of scrap steel, and support the development of short process steelmaking. Develop the technology of collaborative treatment of social waste by iron and steel kilns, promote industrial demonstration and application, realize the collaborative treatment of social waste by iron and steel kilns, reduce the pressure and cost of social waste treatment, and reduce the emission of pollutants and carbon dioxide. Optimize the layout of scrap processing base and improve the concentration of scrap processing industry. Give full play to the energy processing and transformation function of iron and steel production process, build an energy industry chain with iron and steel production as the core, promote the cogeneration of low-grade waste heat and steam resources to provide heating and cooling to the society, realize the cogeneration of water, gas and heat with the surrounding industrial enterprises, residents and commercial users, and realize the coordinated optimization of regional energy and environmental resources. (The Provincial Development and Reform Commission takes the lead, and the Provincial Department of Industry and Information Technology and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
(2) Petrochemical
1. Strictly control low-end production capacity. We will strictly control the new production capacity of nitrogen fertilizer, phosphate fertilizer, calcium carbide, caustic soda, soda ash and yellow phosphorus, accelerate the withdrawal of low-end and inefficient production capacity, effectively control the total scale, and constantly consolidate and enhance the competitive advantages of traditional industries. Strong enterprises are encouraged to carry out mergers and reorganizations to achieve effective allocation of industry resources and further reduce excess capacity. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission and the Provincial State-owned Assets Supervision and Administration Commission are responsible for the division of responsibilities)
2. Optimizing the industrial structure. Strictly control the capacity of new energy-consuming industries such as oil refining, implement the second phase project planning plan of Lianyungang Petrochemical Industry Base, and speed up the formulation of a special carbon peak plan for Xuwei Petrochemical Base. Relying on various resources provided by the integrated refining and chemical industry and the diversified raw material processing industry, we will carry out deep low-carbon extension processing and develop high-end petrochemical products such as new chemical materials and special fine chemicals. Aiming at new high-end chemical materials with low energy consumption and good market, such as aerospace, electronic information, new energy, rail transit and national defense industry, we will accelerate the adjustment of product structure in the petrochemical industry of the whole province. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
3. Deepening energy conservation and efficiency. Adjust the structure of raw materials, strictly control the use of coal for new raw materials, and promote the lightening of petrochemical raw materials. Tap the potential of energy conservation and emission reduction, encourage enterprises to upgrade and transform energy conservation, and realize energy cascade utilization and material recycling. Promote the coordinated development of petrochemical industry and coal mining, metallurgy, building materials, chemical fiber and other industries, strengthen the efficient utilization of refinery dry gas, liquefied gas and other by-product gases, and improve the efficiency of resource utilization. (The Provincial Development and Reform Commission and the Provincial Department of Industry and Information Technology are responsible for the division of responsibilities)
4. Promoting technological innovation. Adhere to the development direction of "atomic economy" of green chemistry and chemical industry, focus on the development of high-efficiency distillation system, high-efficiency advanced coal oxidation, oxygen cathode ion-exchange membrane electrolysis, carbon capture and utilization technologies, promote clean raw material substitution, carry out waste salt incineration refining, waste sulfuric acid pyrolysis, coal gasification co-disposal equipment cleaning and other related technologies to promote the application, and effectively improve the level of carbon sequestration and carbon reduction in the industry. We should speed up the improvement of the collaborative innovation system of industry, University and research, and create a regional innovation community. (The Provincial Development and Reform Commission, the Provincial Department of Industry and Information Technology, the Provincial Department of Science and Technology, and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
(3) Building materials
1. Accelerate the upgrading of products. Develop cement intensive processing products, strengthen the research and development of special cement, ecological cement, low-carbon concrete and functional concrete products, improve 42. Vigorously develop new wall materials, waterproof, thermal insulation and airtight integrated materials, high-performance precast piles and other green building materials, promote the application of photovoltaic building integration and prefabricated parts, and promote the development of photovoltaic building integration and prefabricated parts. Local governments are encouraged to give priority to purchasing green building materials and assembly building materials in construction projects such as livelihood projects and beautiful countryside. Support building materials enterprises to expand their product range and extend the industrial chain from materials to products, engineering and services. (Provincial Industry and Information Technology Department, Provincial Housing and Urban-Rural Construction Department, Provincial Development and Reform Commission, etc. Are responsible for the division of responsibilities)
2. Accelerate the optimization of energy structure. Renewable energy such as wind and solar energy should be used according to local conditions to gradually increase the proportion of clean energy consumption in the building materials industry. Promote low-cost and large-scale pretreatment technologies such as biomass fuels and domestic waste, develop research and development of energy application solutions such as alternative raw materials, alternative fuels and waste heat power generation, support a high proportion of combustible wastes such as refuse-derived fuels, plastics, rubber and biofuels to replace coal, and improve the recovery and classification of combustible wastes. Promote the high calorific value, low cost and standardized pretreatment of alternative fuels, and improve the coal substitution rate of building materials industry. (Provincial Development and Reform Commission, Provincial Department of Industry and Information Technology, Provincial Department of Housing and Urban-Rural Construction, etc. Are responsible for the division of responsibilities)
3. Accelerate technological innovation. The cement industry will accelerate breakthroughs in energy-saving and consumption-reducing technologies such as cement suspension boiling calcination and low waste heat utilization, and promote the popularization and application of energy-saving technologies and equipment such as low-resistance cyclone preheater, high-efficiency firing, kiln optimization control, high-efficiency grate cooler and high-efficiency energy-saving grinding. The glass industry has accelerated the application of key technologies such as multi-line technology in one float glass kiln, preheating technology outside the glass kiln, hydrogen calcination in the kiln, high-quality float glass coating technology, and pure oxygen + electric melting composite combustion.The industry of wall materials and prefabricated parts promotes standardized design, factory production and mechanized construction. The rock wool industry has accelerated the promotion of electric melting production technology and technical equipment. The lime industry has accelerated the promotion of energy-saving technology and equipment such as double-chamber vertical kilns. The wall material industry has accelerated the promotion of kiln sealing, thermal insulation and energy-saving technology and equipment. (Provincial Industry and Information Technology Department, Provincial Housing and Urban-Rural Construction Department, Provincial Science and Technology Department, etc. Are responsible for the division of responsibilities)
4. Accelerate the utilization of solid waste resources. Give full play to the advantages of harmless waste absorption in building materials industry. Improve the substitution of solid waste resources in the process of cement grinding
(4) Other industries
1. Textile industry. Promote the promotion of energy-saving and consumption-reducing technologies such as low-temperature printing and dyeing, intermittent dyeing with small bath ratio and low energy consumption, recovery and utilization of high-temperature wastewater heat energy, and cascade utilization of steam heat energy, and accelerate the application of pollution control and emission reduction technologies such as non-aqueous medium printing and dyeing, continuous printing and dyeing of knitted fabrics, low energy consumption printing and dyeing, and advanced treatment and recovery of wastewater. Develop intelligent and efficient flexible preparation of polyester, nylon, spandex and other fibers, printing and dyeing production MES system and solutions, online detection and control of production process parameters and production process automation and other key technologies of intelligent manufacturing in the textile industry. We will accelerate the development of differentiated, functional and intelligent high-performance fibers and high-grade textiles, focus on the development of high-value-added clothing products such as smart wear and functional clothing, and promote the transformation of the clothing industry to fashion, brand and green. (The Provincial Department of Industry and Information Technology takes the lead, and the Provincial Development and Reform Commission and the Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
2. Paper industry. Research and development of efficient and comprehensive utilization technology of low calorific value biomass fuel, focusing on the promotion and application of biomass pyrolysis and energy conversion, low energy consumption cooking, shoe pressing, sludge waste heat drying and other energy-saving and carbon-reducing technologies. Strengthen the scientific management of paper production capacity and energy consumption, and actively guide the use of high-efficiency energy-saving equipment. Accelerate the application of recycling and anti-pollution and emission reduction technologies such as multi-stage countercurrent washing, closed screening, efficient collection, storage and transportation of agricultural and forestry residues, utilization of biomass solid waste and biogas, efficient evaporation of black liquor, high-concentration combustion and efficient recycling of chemicals. We will improve the waste paper recycling and classification system, optimize the waste paper treatment process and equipment, and comprehensively improve the recycling rate of waste paper. (Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission and Provincial Department of Ecology and Environment are responsible for the division of responsibilities)
5. Safeguard measures
(1) Strengthen overall coordination. Strengthen the centralized and unified leadership of carbon peak action, strengthen coordination and cooperation among various departments, and form work and policy synergy. The competent departments of industry and information technology in all districts, cities and counties (cities and districts) should conscientiously implement the important decision-making and deployment of the state and provinces on carbon peak and carbon neutralization, and systematically promote and refine the implementation of carbon peak work in the industrial field of various regions in accordance with relevant laws and regulations in light of the actual situation. Give full play to the role of industry associations, scientific research institutes, industrial alliances and other institutions as a link, and mobilize all social forces to actively participate in the work of industrial carbon peak. (Provincial Development and Reform Commission, Provincial Department of Industry and Information Technology, Provincial Department of Science and Technology, Provincial Department of Finance and Provincial Department of Ecological Environment are responsible for the division of responsibilities)
(2) Strengthen policy support. We will implement and improve preferential tax policies on energy conservation and emission reduction, green manufacturing, and comprehensive utilization of resources, so as to better play the role of taxation in promoting the green and low-carbon development of market participants. We will make overall use of special financial funds and other channels to build a number of carbon peak and carbon neutralization demonstration projects. We should give full play to the guiding role of government investment funds, attract private industry funds to invest in new energy, energy conservation, environmental protection and carbon trading, and mobilize social capital to invest in low-carbon related industries. We will improve the green financial system, strengthen coordination between financial and industrial policies, and promote the use of green credit, green funds, green bonds, green insurance and other financial instruments to accelerate the green and low-carbon transformation of manufacturing enterprises. (Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission, Provincial Tax Bureau, Provincial Science and Technology Department, Provincial Finance Department, Provincial Department of Ecology and Environment, Provincial Local Financial Supervision Bureau and Nanjing Branch of the People's Bank of China are responsible for the division of responsibilities)
(3) Strengthen standard guidance. We will accelerate the updating of energy-saving standards, scientifically formulate energy efficiency standards for various industries in light of the actual situation of the province and the benchmarking level and benchmark level of energy efficiency in key areas of high-energy-consuming industries. Strengthen the implementation of standards and carry out the evaluation of the implementation effect of standards. Promote the certification of energy management system, improve the industrial green low-carbon standard system, actively carry out third-party certification and evaluation, encourage enterprises to carry out green design, green transformation, green procurement, and support enterprises to produce low-carbon environmental protection, energy-saving and water-saving, recycling, renewable organic and other green products. Develop green building materials products and green building logo certification. (Provincial Market Supervision Bureau, Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission, Provincial Department of Ecological Environment, Provincial Department of Housing and Urban-Rural Construction, etc. Are responsible for the division of responsibilities)
(4) Consolidating basic capacity. Relying on national laboratories, national scientific research institutions, high-level research universities and leading enterprises in science and technology, we will cultivate a group of top talents and leading talents and teams to lead the development of green low-carbon technology innovation in the industry, focusing on supporting the construction of high-level innovation teams, and providing high-end talent guarantee for carbon peak and carbon neutralization. We will build a public service platform for carbon peak and carbon neutralization in key industries such as iron and steel, petrochemical and chemical industries, and constantly improve the functions of the platform and improve the service level. To give full play to the main role of enterprises, key energy-consuming enterprises should formulate action plans for carbon peak and carbon neutralization, as well as task books, timetables and road maps for low-carbon transformation. (Provincial Department of Industry and Information Technology, Provincial Development and Reform Commission, Provincial Science and Technology Department, Provincial Department of Ecology and Environment, and Provincial SASASAC are responsible for the division of responsibilities)
(5) Improving the market mechanism. We will comprehensively promote the construction of carbon emission rights, energy use rights, electricity trading and other markets, strengthen the links and coordination between market mechanisms, and promote the trading of carbon emission rights and energy use rights. Promote the innovation of price mechanism and implement the price reform of resource products. Promote government green procurement, give priority to the purchase and use of products and services that meet the national green certification standards, and promote enterprises to improve energy utilization and environmental protection behavior.
浙公网安备33010802003254号